The two places you spend the most time: at home and the work place. The air quality in your home and at the work place should be tested regularly since it can get dangerously low from time to time. This can still happen even if the air conditioning equipment is filtering the air all day long.
If that makes you wonder about how it happens, the effects of low air quality, and what you can do to improve it, we’ll take a look at the main ways that air inside your offices and homes is getting polluted by the minute. We’ll also talk about indoor air quality testing and solutions that will help you to detect and get rid of the Air problem.
Some of the common indoor air pollutants include:
- Pollutants from Combustion
Pollutant gases, like carbon monoxide and nitrogen dioxide, are released whenever combustion takes place. Every time a flame is allowed to burn, e.g. in the kitchen or cafeteria, these gases are filling up the space with pollutants.
Installing carbon monoxide alarms in different parts of the house will help detect carbon monoxide. Nitrogen monoxide can be recognized by its acrid odor. The indoor air quality solution to these is to provide proper ventilation in the kitchen with a fan or chimney.
Radon is a dangerous and radioactive gas that is normally found in soil. It often finds its way into the lower part of the house, particularly through the basement.
Detection of radon is done via DIY radon test kits that can be obtained for free or heavily subsidized rates from the state radon office. Once detected, the solution is to seal off any portion of soil that the lower levels are exposed to.
Asbestos is mostly a danger in older buildings, since newer buildings have moved on to non-asbestos materials. There is no DIY option for dealing with asbestos. If you believe that your home may have too much, it’s best to get it checked by state asbestos labs.
- Volatile Organic Compounds
Everyday products that range from paint to printers contain several Volatile Organic Compounds, or VOCs. They accumulate indoors, usually after painting or printing is done.
The best solution is to ventilate the air so that VOCS move out of the house or office. Test kits are available that can measure formaldehyde, which is an important VOC to watch out for.
- Mold and Mildew
Wherever moisture accumulates, most kinds of fungus will grow quickly. There is no testing available for this at the time. However, you can often see or smell mold growing in your home. The solution is to remove the mold, which can be done with soap and water.
As part of the indoor air quality solution, prevention is the key. Ensure that the moisture-filled surfaces have been dried thoroughly, and keep them dry in the future.
- Dander and Droppings
One of the key components of dust is dander and droppings from a variety of animals and rodents that live in any building; like dust mites, cockroaches and rats. Each of them leaves behind a trail of waste that causes air quality to go down.
Similar to mold, there are no testing kits for dander or droppings. Having a duct cleaning & sealing done for your home and office will help to eliminate the dander problem.
Animal-based waste is often dealt with by using different types of poisons for pest control. This is almost like solving one problem and inviting another!
Pesticides contain large quantities of toxins and can cause a variety of airborne diseases. A solution to this is to use non-toxic natural alternatives to take care of pests, duct cleaning & sealing, and not storing pesticides indoors.
It is always a good idea to get the air in your home or office tested by expert indoor air quality solutions providers. These professionals can test for all the above agents and also offer effective solutions that’s affecting the air quality in your home or office.