TRUSTWORTHY. ON-TIME. WORRY-FREE.

Are $78 Furnace Tune-Ups Really Necessary? Is It Worth It? What’s Involved?

Are $78 Furnace Tune-Ups Really Necessary? Is It Worth It?

Necessary?

Your furnace is one of the most expensive appliances you have in your home. Just like your car, the furnace has dozens of crucial parts and there for needs to be professionally tuned-up and cleaned on an annual basis.

We are discounting our tune-ups by over 50%. From January 20th until February 28th homeowners can reviece an complete prescision tune-up and professional cleaning normally proced at $169 for only $78.

Worth It?

To answer this question I asked the founder of Service Champions, Kevin Comerford.

“When I run this type of promotion I don’t expect to make any money on the front end. I am confident homeowners who test out my service will be delighted. If they don’t see a savings on their utility bill or they don’t feel it was worth their hard earned dollar they can ask for a full refund, no quesitons asked.”

So there you go, you will get your money and satisfaction guaranteed! Is it worth it? How is it not?!

Whats Included?

The Tune-Up and cleaning is a 21 point inspection of your system that includes the following:

  1. Test duct system for carbon monoxide
  2. Test ignition system for safe and proper operation
  3. Inspect for combustible material around furnace
  4. Calibrate and level thermostat
  5. Test exhaust system for proper venting
  6. Measure temperature difference Supply/Return
  7. Test safety and control circuts for proper operation
  8. Inspect and adjust fan belt tension (if applicable)
  9. Clean existing filter
  10. Lubricate and clean blower motor air vents
  11. Brush, clean and vacuum burner
  12. Brush, clean and vacuum heat exchangers
  13.  Visually inspect heat exchanger for wear and cracks
  14. Clean and test thermocouple for proper operation
  15. Measure and adjust gas pressure for peak efficiency
  16. Lubricate all moving parts, per manufacturer
  17. Measure amperage and voltage of blower
  18. Tighten and inspect all electrical wiring
  19. Clean upper and lower combustion vents
  20. Test for natural gas leaks
  21. Clean Furnace exterior

Whew! The number of availability per 30 days is 250 appointments and trust us, they go FAST.

Call to make and appointment today!

Are $78 Furnace Tune-Ups Really Necessary? Is It Worth It?

Necessary?

Your furnace is one of the most expensive appliances you have in your home. Just like your car, the furnace has dozens of crucial parts and there for needs to be professionally tuned-up and cleaned on an annual basis.

We are discounting our tune-ups by over 50%. From January 20th until February 28th homeowners can reviece an complete prescision tune-up and professional cleaning normally proced at $169 for only $78.

Worth It?

To answer this question I asked the founder of Service Champions, Kevin Comerford.

“When I run this type of promotion I don’t expect to make any money on the front end. I am confident homeowners who test out my service will be delighted. If they don’t see a savings on their utility bill or they don’t feel it was worth their hard earned dollar they can ask for a full refund, no quesitons asked.”

So there you go, you will get your money and satisfaction guaranteed! Is it worth it? How is it not?!

Whats Included?

The Tune-Up and cleaning is a 21 point inspection of your system that includes the following:

  1. Test duct system for carbon monoxide
  2. Test ignition system for safe and proper operation
  3. Inspect for combustible material around furnace
  4. Calibrate and level thermostat
  5. Test exhaust system for proper venting
  6. Measure temperature difference Supply/Return
  7. Test safety and control circuts for proper operation
  8. Inspect and adjust fan belt tension (if applicable)
  9. Clean existing filter
  10. Lubricate and clean blower motor air vents
  11. Brush, clean and vacuum burner
  12. Brush, clean and vacuum heat exchangers
  13.  Visually inspect heat exchanger for wear and cracks
  14. Clean and test thermocouple for proper operation
  15. Measure and adjust gas pressure for peak efficiency
  16. Lubricate all moving parts, per manufacturer
  17. Measure amperage and voltage of blower
  18. Tighten and inspect all electrical wiring
  19. Clean upper and lower combustion vents
  20. Test for natural gas leaks
  21. Clean Furnace exterior

Whew! The number of availability per 30 days is 250 appointments and trust us, they go FAST.

Call to make and appointment today!